BS 3032 Large Dee Shackle

BS 3032 Large Dee Shackle Product Introduction

BS 3032 Large Dee Shackle is heavy duty drop forged rigging hardware manufactured in accordance with British Standard BS 3032 specifications. Constructed from high tensile carbon steel with quenching and tempering heat treatment, this large dee shaped shackle delivers outstanding strength for straight line tension loads. Equipped with screw pin for quick connection and disconnection, it is available in hot dip galvanized or self colour finish. Each shackle is permanently stamped with WLL and size marking for full traceability. Widely adopted for industrial lifting, port operation, marine rigging and heavy duty towing under rigorous working conditions.

BS 3032 Large Dee Shackle Key Features

1. Manufactured strictly to British Standard BS 3032, specially designed for inline heavy load rigging and lifting applications

2. Drop forged high tensile carbon steel with full heat treatment, excellent tensile strength and impact resistant performance

3. Optimized large dee inner opening, accepts larger diameter ropes, chains and wire ropes while maintaining stable linear force transmission

4. Reliable screw pin design enables fast assembly and removal, resists pin loosening caused by vibration during hoisting and towing

5. Optional hot dip galvanized or self colour surface, anti rust for marine, coastal and outdoor harsh environments

6. Clear permanent stamping of working load limit and dimension, batch proof load tested with standard safety factor

7. Comprehensive size range in stock, custom stamping and OEM service supported for bulk orders

BS 3032 Large Dee Shackle FAQ

Q1: What is the safety factor of BS 3032 Large Dee Shackle?

A: Standard BS 3032 large dee shackle provides minimum 5:1 safety factor under straight tension lifting conditions, complying with British rigging requirements.

Q2: Can BS 3032 Large Dee Shackle be used for side pull?

A: Side pull will significantly reduce rated working load capacity. Straight inline tension use is strongly recommended. Contact our technical team if side pull conditions cannot be avoided.

Q3: Which surface finish options are available for BS 3032 shackles?

A: Hot dip galvanized for corrosion prone outdoor and marine environment; self colour finish for welding or subsequent painting requirements.

Q4: Do you support OEM customization for bulk orders?

A: Yes, custom logo stamping, special dimension and exclusive packaging can be supported for large quantity orders.

Q5: What qualification documents can you supply?

A: Material test certificate, factory inspection report and load test report can be provided upon request for inspection and customs clearance.