 |
| Quantity: | |
|---|---|
Fist Grip Wire Rope Clip is an upgraded heavy-duty forged wire rope fastener, also known as double saddle rope clip and fist style cable clamp. Different from traditional single U-bolt clips, it adopts innovative double-sided symmetrical saddle structure and integrated bolt design, solving the common problems of uneven stress, rope extrusion damage and directional installation limitation of conventional clips.
Manufactured by integral drop forging of high-strength carbon steel, this fist grip clip features ultra-high clamping efficiency and structural stability. It supports free-direction installation without distinguishing live end and dead end, greatly improving construction flexibility. With a breaking force efficiency up to 80%-90%, it is widely recognized in high-standard industrial rigging, crane matching, marine engineering and permanent rope termination projects.
18 Years Professional Production Experience: We specialize in high-efficiency forged rigging clips, with mature forging precision control and long-term supporting experience for high-end engineering export projects.
Adopts upper and lower double-sided fitting structure, the clamping force acts evenly on the whole wire rope, avoids unilateral extrusion and flat rope deformation, effectively protecting the wire rope core and prolonging service life.
Professional heavy-duty fist grip structure realizes 80%-90% rope breaking force retention rate, far higher than ordinary malleable clips, meeting high-standard permanent fixing and heavy-load rigging requirements.
No need to distinguish live rope and dead rope direction during installation, arbitrary assembly angle, full-range wrench operation space, convenient for narrow and complex construction environments.
High-quality carbon steel integral drop forging process, dense metal texture, strong tensile and compression resistance, no crack or deformation under long-term dynamic tension.
Equipped with high-strength matching bolts and thickened hex nuts, precise thread fit, uniform locking force, excellent anti-loosening performance under vibration and alternating load.
Standard hot-dip galvanized finish with thick and uniform zinc layer, superior salt spray resistance and rust resistance, suitable for marine, coastal and harsh outdoor working conditions.
Strictly manufactured according to American industrial standards, complete inch size range, fully compatible with US standard steel wire ropes for North American market export.
Stable mechanical structure and standardized load performance, supporting repeated disassembly, adjustment and reuse after safety inspection, with high engineering cost performance.
18 years of focus on forged heavy-duty wire rope clips, proficient in fist grip structural forging process and efficiency standard control.
Each batch undergoes professional holding efficiency test, tension detection and appearance flaw detection to ensure compliance with high-standard engineering parameters.
Support custom logo marking, special galvanized thickness, stainless steel material replacement and exclusive export packaging.
All conventional inch sizes are in stock, supporting bulk wholesale, mixed batch delivery and urgent order fast shipment.
Independent forging and finishing production lines, no middleman premium, providing high-efficiency safety rigging accessories for high-end engineering projects.
Provide standard installation process and quantity matching suggestions to maximize rope clamping efficiency and construction safety.
Model Size | Applicable Rope Diameter | Material | Surface Treatment | Holding Efficiency | Application |
Fist Grip 3/16" | 3/16 inch | Forged Carbon Steel | Hot-dip Galvanized | 80% | Precision equipment rope fixing |
Fist Grip 1/4" | 1/4 inch | Forged Carbon Steel | Hot-dip Galvanized | 80% | Light industrial rigging |
Fist Grip 5/16" | 5/16 inch | Forged Carbon Steel | Hot-dip Galvanized | 80% | General engineering tensioning |
Fist Grip 3/8" | 3/8 inch | Forged Carbon Steel | Hot-dip Galvanized | 80% | Construction standard rigging |
Fist Grip 1/2" | 1/2 inch | Forged Carbon Steel | Hot-dip Galvanized | 80% | Medium load permanent connection |
Fist Grip 5/8" | 5/8 inch | Forged Carbon Steel | Hot-dip Galvanized | 80% | Mechanical heavy-duty rigging |
Fist Grip 3/4" | 3/4 inch | Forged Carbon Steel | Hot-dip Galvanized | 80% | Large rope industrial fixing |
Fist Grip 7/8" | 7/8 inch | Forged Carbon Steel | Hot-dip Galvanized | 80% | Heavy equipment rigging |
Fist Grip 1" | 1 inch | Forged Carbon Steel | Hot-dip Galvanized | 90% | Super heavy load engineering |
Fist Grip 1 1/4" | 1 1/4 inch | Forged Carbon Steel | Hot-dip Galvanized | 90% | Large-scale marine rigging |
Fist Grip 1 1/2" | 1 1/2 inch | Forged Carbon Steel | Hot-dip Galvanized | 90% | Ultra-heavy industrial termination |
Fist Grip Wire Rope Clip is a high-efficiency heavy-duty forged fastener, specially used for high-standard wire rope termination, permanent fixing and loop forming. It is widely applied in crane equipment, marine rigging, large construction engineering and industrial heavy-load tensioning scenarios.
Different from traditional single-sided U-bolt clips, fist grip adopts double-saddle symmetrical clamping, which will not damage or flatten the wire rope. It has higher holding efficiency, free directional installation, stronger vibration resistance and higher overall safety factor, suitable for high-standard engineering that ordinary clips cannot meet.
Its overall clamping state is like a fist tightly gripping the wire rope, with uniform internal force and firm locking. The integrated double-sided wrapping structure realizes all-round stable holding, hence the name fist grip wire rope clip.
Hardly. The arc design of double saddles fits the rope body completely, disperses local pressure, avoids sharp extrusion and rope core damage, and maximally protects the structural integrity and tensile performance of the wire rope.
Sizes from 3/16'' to 7/8'' reach 80% rope breaking force efficiency; sizes from 1'' to 1 1/2'' reach up to 90% high efficiency, far exceeding the clamping standard of conventional rigging clips.
Yes. The symmetrical structure eliminates the limitation of live and dead rope direction. Workers can install and adjust at any angle, with unobstructed wrench operation, greatly improving on-site construction efficiency.
Yes. We support custom special sizes, stainless steel material replacement, laser logo marking, customized galvanized thickness and exclusive packaging services.
All conventional inch sizes are in sufficient stock for fast delivery. Customized products can be completed within 3-7 working days, supporting long-term stable bulk supply for high-end engineering and foreign trade markets.
